Standby Generator Installation Instructions

used generator

Nowadays everyone is thinking that buying a new generator and installing a generator is an essential step to ensure the safety of their home.

Your generator is connected to the entire electrical system of your house, when there is a drain of electricity, the generator can run all your devices. Since entire house generators run on natural gas or propane, they can use all their necessary equipment to house them in an emergency.

This product is intended for use as an alternative generator system only. Which provides an alternative source of electric power and Heating, refrigeration system and communication system provides electricity when electricity is lost due to some reason. A power outage may because trouble and you want a generator.

Emergency generator arrangements are designed to automatically provide lights, power, or both in the event of a general supply failure for specified areas and accessories. Emergency systems may, moreover, provide power for functions such as ventilation that were necessary to sustain life, where current normal supply breaks will cause serious life safety or health hazards.

Owner Responsibilities

● Must Read and follow the instructions given in the operator’s manual.

● Attend a regular schedule in maintaining and caring for your generator.

● Use the operator’s manual for operating your generator.

Step for Your Generator Installation

Installing a natural gas standby generator is quite simple, but sometimes difficult.

To install your generator first, you need to prefer the right generator for your home or small business. After determining which size and configuration best suits your needs, you can prepare for the installation of the generator.

Generator Size

The first point to consider before picking a generator is to find out what size generator you need. If you want only your essentials such as pump pumps and refrigerators to be operated, then the size of your generator will be much smaller than the generator required to power your entire house. And these small generators starting watt is 7,000 watts which can meet your needs. If you decide you want to have air conditioning in a power outage, you will usually be looking at a generator close to 20kW.

Hire an Installer

Hiring a single installer from the business from which you purchased your generator sets up a streamlined process. You can break down the generator installation requirements into smaller projects for different tradesmen, such as plumbers and electricians. This method would require the home or business owner to do more work themselves, such as filing for permits. This method can be quick, however, if your dealer is experiencing a rush of orders before the hurricane season or the winter season.

Choose the Location

Your generator must be located in an area that is:

● Accessible for maintenance

● Near fuel source and electrical hookup

● Away from windows, doors and water sources

● By way of utilities

● Clear everywhere

● Conform to other homeowners or other neighborhood rules

● Your generator will need to be connected with a transfer switch so that’s why it does not have back-feed power to the network. Choose the location of the transfer switch based on the location of your generator, access, and wiring in your home.

Your generator installation checklist should include determining the location of your fuel source, most likely a tank or an existing distribution pipeline. The closer your fuel is to your generator, the lower the cost will be associated with this step. You have to follow local codes regarding fuel storage.

Receive Necessary Permits

Your plans may need to be approved before your city, state or homeowners. It is very important to do before the generator installation process.

A concrete base

Your Generator should rest on the concrete base. This will keep it above standing water and anchor it in place during inclement weather or natural disasters.

Connect Generator

After placing the generator on a concrete pad, it can be connected to the fuel source and your home via a transfer switch. These tasks should be completed by your installer or plumber and electrician.

When your generator is connected, clear all debris from space and surround the generator in a way that makes sense for your climate. This possibility means that rodent guards and may include cold-weather kits.

Final Inspection

Your installer should check all new connections, as well as oil and fuel levels. Then, your generator will be ready to produce electricity. In the final inspection, you should check all the things very accurately otherwise, you may face problems in running the generator.


You can find here the Standby Generator Installation instructions. I suppose my all information is helpful for all of you. If you need extra detail about the new and used generator. So please contact our EO energy expert team. They solved your all Questions.

Leave a Reply

Your email address will not be published. Required fields are marked *